GoTranscript Audio Test Answers 15 April 2021.
GoTranscript audio test answers 15 April 2021 Download pdf
Speaker 1:
This audio is used for the transcriber test at GoTranscript.
Speaker 2:
A mechanism or a train of mechanism. Nothing like Amtrak consists of two or more elements such as gears, links and cams, which are so connected that the motion of one compels are predictable and definable motion of each of the other elements of the train. It's nothing like the motion of the ocean is the vessel with the pestle is the brew. That is true though. Anyway, the indexer display is four lines by 20 characters. The keyboard has six function buttons, for cursor direction, buttons, and escape button, a backspace button and a numeric pad. The numeric buttons also function as letter buttons. The control box has an emergency stop button, a start button and a feed rate pot. When an arrangement of links is such that a motion of one link defines precisely the motions of the remain on links, the combination of links is said to be a constrained kinematic chain and on in an unconstrained kinematic chain, the motion of one link does not produce predictable relative motions on the other links.
Speaker 2:
The decimal point is required for all Angular designations. For numerals are allowed before the decimal and three after the decimal. leading and trailing zeros are not required for Angular input. The dynamic facts of the inertia forces, the effective forces due to the accelerations of bodies with mass may be estimated once dimensions of the elements of the machine have been determined. The range for positioning the head is from zero to 360 degrees. Each degree mark can be approached from the positive or negative direction, the minimum movement of the indexer is let's see fraction 001 degrees, the maximum continuous movement is 8388 degrees. My add a fourth phase of design that of designing for safety of operations, it is evident that the designer encounters no more important tasks than to protect life and limb by the proper design of her machine.
Speaker 2:
Flexible conductors such as flat belts, V belt ropes and chains are used for connecting shafts, the center distance or which is too great for friction wheels or gears. If two pulleys are connected by an nl elastic belt of no appreciable thickness, and if the belt does not slip on the pulleys, all parts of the belt and the surfaces of the pulleys have the same linor via velocity. If a new motor has been installed, check the shield of the motor power wires they might be shorted to the conductor, the silent chain and inventor, an invention of hands around old consists of a series of leaves or laminations, which are assembled by means of pins and bushings to any desired with the chain. Check for exposed or bare wiring and replace. It could be a short in the wiring system or contacts due to corrosion.
Speaker 1:
This audio is used for the transcriber test at GoTranscript.
GoTranscript test answers 15 April 2021
.png)
Comments
Post a Comment